dmesg - ASUS AMD Radeon HD 7800
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10-3-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5+steamos1+bsos1) ) #1 SMP Debian 3.10.11-1st1 (2014-04-29)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd824fff] usable
BIOS-e820: [mem 0x00000000dd825000-0x00000000ddf25fff] reserved
BIOS-e820: [mem 0x00000000ddf26000-0x00000000ddf35fff] ACPI data
BIOS-e820: [mem 0x00000000ddf36000-0x00000000de058fff] ACPI NVS
BIOS-e820: [mem 0x00000000de059000-0x00000000de821fff] reserved
BIOS-e820: [mem 0x00000000de822000-0x00000000de822fff] usable
BIOS-e820: [mem 0x00000000de823000-0x00000000de865fff] ACPI NVS
BIOS-e820: [mem 0x00000000de866000-0x00000000dec87fff] usable
BIOS-e820: [mem 0x00000000dec88000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xddf29000 ACPI 2.0=0xddf29000 SMBIOS=0xf04c0 MPS=0xfd4a0
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x000000000035c000) (2MB)
efi: mem06: type=7, attr=0xf, range=[0x000000000035c000-0x0000000001000000) (12MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000035c26000) (843MB)
efi: mem09: type=2, attr=0xf, range=[0x0000000035c26000-0x0000000036e0b000) (17MB)
efi: mem10: type=7, attr=0xf, range=[0x0000000036e0b000-0x0000000097046000) (1538MB)
efi: mem11: type=2, attr=0xf, range=[0x0000000097046000-0x00000000cb394000) (835MB)
efi: mem12: type=7, attr=0xf, range=[0x00000000cb394000-0x00000000cb39a000) (0MB)
efi: mem13: type=1, attr=0xf, range=[0x00000000cb39a000-0x00000000cb3b7000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000cb3b7000-0x00000000cfa5f000) (70MB)
efi: mem15: type=4, attr=0xf, range=[0x00000000cfa5f000-0x00000000cfa60000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x00000000cfa60000-0x00000000d0015000) (5MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000d0015000-0x00000000d04b4000) (4MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000d04b4000-0x00000000d0ab6000) (6MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000d0ab6000-0x00000000d0c0c000) (1MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000d0c0c000-0x00000000d0c8e000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x00000000d0c8e000-0x00000000d189f000) (12MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000d189f000-0x00000000d1906000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x00000000d1906000-0x00000000d1923000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000d1923000-0x00000000d1940000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x00000000d1940000-0x00000000d1bd5000) (2MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000d1bd5000-0x00000000d1bdb000) (0MB)
efi: mem27: type=4, attr=0xf, range=[0x00000000d1bdb000-0x00000000d1e13000) (2MB)
efi: mem28: type=7, attr=0xf, range=[0x00000000d1e13000-0x00000000d20e1000) (2MB)
efi: mem29: type=4, attr=0xf, range=[0x00000000d20e1000-0x00000000d20f7000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x00000000d20f7000-0x00000000d20ff000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x00000000d20ff000-0x00000000dcc31000) (171MB)
efi: mem32: type=7, attr=0xf, range=[0x00000000dcc31000-0x00000000dd18e000) (5MB)
efi: mem33: type=2, attr=0xf, range=[0x00000000dd18e000-0x00000000dd194000) (0MB)
efi: mem34: type=3, attr=0xf, range=[0x00000000dd194000-0x00000000dd825000) (6MB)
efi: mem35: type=0, attr=0xf, range=[0x00000000dd825000-0x00000000ddd85000) (5MB)
efi: mem36: type=0, attr=0xf, range=[0x00000000ddd85000-0x00000000ddebb000) (1MB)
efi: mem37: type=0, attr=0xf, range=[0x00000000ddebb000-0x00000000ddec1000) (0MB)
efi: mem38: type=0, attr=0xf, range=[0x00000000ddec1000-0x00000000ddf26000) (0MB)
efi: mem39: type=9, attr=0xf, range=[0x00000000ddf26000-0x00000000ddf29000) (0MB)
efi: mem40: type=9, attr=0xf, range=[0x00000000ddf29000-0x00000000ddf36000) (0MB)
efi: mem41: type=10, attr=0xf, range=[0x00000000ddf36000-0x00000000ddfb5000) (0MB)
efi: mem42: type=10, attr=0xf, range=[0x00000000ddfb5000-0x00000000de059000) (0MB)
efi: mem43: type=6, attr=0x800000000000000f, range=[0x00000000de059000-0x00000000de52f000) (4MB)
efi: mem44: type=6, attr=0x800000000000000f, range=[0x00000000de52f000-0x00000000de6cd000) (1MB)
efi: mem45: type=6, attr=0x800000000000000f, range=[0x00000000de6cd000-0x00000000de6d1000) (0MB)
efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000de6d1000-0x00000000de77d000) (0MB)
efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000de77d000-0x00000000de79e000) (0MB)
efi: mem48: type=5, attr=0x800000000000000f, range=[0x00000000de79e000-0x00000000de822000) (0MB)
efi: mem49: type=4, attr=0xf, range=[0x00000000de822000-0x00000000de823000) (0MB)
efi: mem50: type=10, attr=0xf, range=[0x00000000de823000-0x00000000de866000) (0MB)
efi: mem51: type=4, attr=0xf, range=[0x00000000de866000-0x00000000de9b7000) (1MB)
efi: mem52: type=3, attr=0xf, range=[0x00000000de9b7000-0x00000000dec5b000) (2MB)
efi: mem53: type=4, attr=0xf, range=[0x00000000dec5b000-0x00000000dec6c000) (0MB)
efi: mem54: type=3, attr=0xf, range=[0x00000000dec6c000-0x00000000dec7e000) (0MB)
efi: mem55: type=4, attr=0xf, range=[0x00000000dec7e000-0x00000000dec7f000) (0MB)
efi: mem56: type=3, attr=0xf, range=[0x00000000dec7f000-0x00000000dec81000) (0MB)
efi: mem57: type=4, attr=0xf, range=[0x00000000dec81000-0x00000000dec88000) (0MB)
efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000dec88000-0x00000000deff4000) (3MB)
efi: mem59: type=4, attr=0xf, range=[0x00000000deff4000-0x00000000df000000) (0MB)
efi: mem60: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f000000) (4592MB)
efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem66: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-V LX2, BIOS 0501 09/28/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 21E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0186e000, 0x0186efff] PGTABLE
BRK [0x0186f000, 0x0186ffff] PGTABLE
BRK [0x01870000, 0x01870fff] PGTABLE
init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[mem 0x21ee00000-0x21effffff] page 2M
BRK [0x01871000, 0x01871fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[mem 0x21c000000-0x21edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdd824fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdd7fffff] page 2M
[mem 0xdd800000-0xdd824fff] page 4k
init_memory_mapping: [mem 0xde822000-0xde822fff]
[mem 0xde822000-0xde822fff] page 4k
BRK [0x01872000, 0x01872fff] PGTABLE
init_memory_mapping: [mem 0xde866000-0xdec87fff]
[mem 0xde866000-0xde9fffff] page 4k
[mem 0xdea00000-0xdebfffff] page 2M
[mem 0xdec00000-0xdec87fff] page 4k
BRK [0x01873000, 0x01873fff] PGTABLE
init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[mem 0xdeff4000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x35c26000-0x36e0afff]
ACPI: RSDP 00000000ddf29000 00024 (v02 ALASKA)
ACPI: XSDT 00000000ddf29078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ddf33c20 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ddf29180 0AA9B (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 00000000de057080 00040
ACPI: APIC 00000000ddf33d30 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ddf33da8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ddf33df0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000ddf33e30 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000ddf33e68 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000ddf341d8 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000ddf34b88 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 00000000ddf35678 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
Initmem setup node 0 [mem 0x00000000-0x21effffff]
NODE_DATA [mem 0x21eff3000-0x21eff6fff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216600000-ffff88021d7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdd824fff]
node 0: [mem 0xde822000-0xde822fff]
node 0: [mem 0xde866000-0xdec87fff]
node 0: [mem 0xdeff4000-0xdeffffff]
node 0: [mem 0x100000000-0x21effffff]
On node 0 totalpages: 2083826
DMA zone: 56 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12364 pages used for memmap
DMA32 zone: 904276 pages, LIFO batch:31
Normal zone: 16072 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000dd825000 - 00000000ddf26000
PM: Registered nosave memory: 00000000ddf26000 - 00000000ddf36000
PM: Registered nosave memory: 00000000ddf36000 - 00000000de059000
PM: Registered nosave memory: 00000000de059000 - 00000000de822000
PM: Registered nosave memory: 00000000de823000 - 00000000de866000
PM: Registered nosave memory: 00000000dec88000 - 00000000deff4000
PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s84928 r8192 d21568 u524288
pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055308
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7914788k/8896512k available (3685k kernel code, 561208k absent, 420516k reserved, 3084k data, 920k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
NR_IRQS:33024 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3417.767 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6835.53 BogoMIPS (lpj=13671068)
pid_max: default: 32768 minimum: 301
init_memory_mapping: [mem 0xde059000-0xde77cfff]
[mem 0xde059000-0xde1fffff] page 4k
[mem 0xde200000-0xde5fffff] page 2M
[mem 0xde600000-0xde77cfff] page 4k
init_memory_mapping: [mem 0xde77d000-0xde821fff]
[mem 0xde77d000-0xde821fff] page 4k
init_memory_mapping: [mem 0xdec88000-0xdeff3fff]
[mem 0xdec88000-0xdeff3fff] page 4k
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (27342.13 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xddf36000-0xde058fff] (1191936 bytes)
PM: Registering ACPI NVS region [mem 0xde823000-0xde865fff] (274432 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000dded3018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000dded4a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dded5c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7f18000-0xf7f183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7f17000-0xf7f173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7f16000-0xf7f167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7f15000-0xf7f150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xf7e00000-0xf7e3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xf7e40000-0xf7e5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf7e60000-0xf7e63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd825000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde823000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec88000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xf0100000-0xf0100fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci 0000:04:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 15 [mem 0xe0000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18324k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcba5f000-0xcfa5f000] (64MB) mapped at [ffff8800cba5f000-ffff8800cfa5efff]
audit: initializing netlink socket (disabled)
type=2000 audit(1401089355.452:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15904
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching consoles 2-6 to frame buffer device
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-05-26 07:29:16 UTC (1401089356)
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 400k freed
Freeing unused kernel memory: 488k freed
udevd[68]: starting version 175
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7f18000
SCSI subsystem initialized
ACPI: bus type ATA registered
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
wmi: Mapper loaded
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffc90004082000, 08:60:6e:55:2e:70, XID 08000880 IRQ 41
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1c impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 43
ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 43
ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 43
ata6: DUMMY
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880215cd4c18), AE_NOT_FOUND (20130328/psparse-537)
ata4.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102M3, max UDMA/133
ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880215cd4c18), AE_NOT_FOUND (20130328/psparse-537)
ata4.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff880215cd4ba0), AE_NOT_FOUND (20130328/psparse-537)
ata5.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff880215cd4ba0), AE_NOT_FOUND (20130328/psparse-537)
ata5.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880215cd4c90), AE_NOT_FOUND (20130328/psparse-537)
ata3.00: ATA-8: KINGSTON SV300S37A120G, 505ABBF1, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880215cd4c90), AE_NOT_FOUND (20130328/psparse-537)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 sdb4 sdb5
sd 3:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-2: new full-speed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=0a4d, idProduct=129d
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Keystation Mini 32
usb 2-2: Manufacturer: Keystation Mini 32
PM: Starting manual resume from disk
PM: Hibernation image partition 8:20 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-3: new full-speed USB device number 3 using xhci_hcd
usb 2-3: New USB device found, idVendor=045e, idProduct=0719
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: Xbox 360 Wireless Receiver for Windows
usb 2-3: Manufacturer: \xffffffc2\xffffffa9Microsoft
usb 2-3: SerialNumber: FFA31FB0
udevd[459]: starting version 175
tsc: Refined TSC clocksource calibration: 3417.825 MHz
Switching to clocksource tsc
ACPI: Requesting acpi_cpufreq
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EFI Variables Facility v0.08 2004-May-17
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
efivars: duplicate variable: SbAslBufferPtrVar-01f33c25-764d-43ea-aeea-6b5a41f3f3e8
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
usb 2-4: new high-speed USB device number 4 using xhci_hcd
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0[ 1.521123] Error: Driver 'pcspkr' is already registered, aborting...
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0[ 1.521312] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
asus_wmi: Disabling ACPI video driver
platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
microcode: Microcode Update Driver: v2.00 , Peter Oruba
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
kvm: disabled by bios
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 7721 MBytes.
[fglrx] vendor: 1002 device: 6818 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.10.2 [Apr 17 2014] with 1 minors
usb 2-4: New USB device found, idVendor=0781, idProduct=b6ba
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: USB3.0 Card Reader
usb 2-4: Manufacturer: SanDisk
usb 2-4: SerialNumber: 11224000653
usbcore: registered new interface driver xpad
usb-storage 2-4:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver snd-usb-audio
usb 4-1: new high-speed USB device number 2 using ehci-pci
Adding 10000380k swap on /dev/sdb4. Priority:-1 extents:1 across:10000380k SS
EXT4-fs (sdb2): re-mounted. Opts: (null)
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
usb 1-1.2: New USB device found, idVendor=0a12, idProduct=0001
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
usb 4-1.5: new low-speed USB device number 3 using ehci-pci
usb 4-1.5: New USB device found, idVendor=046d, idProduct=c512
usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.5: Product: USB Receiver
usb 4-1.5: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input15
logitech 0003:046D:C512.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/input/input16
logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input1
FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
usb 4-1.6: new full-speed USB device number 4 using ehci-pci
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
usb 4-1.6: New USB device found, idVendor=04e8, idProduct=3301
usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.6: Product: ML-1660 Series
usb 4-1.6: Manufacturer: Samsung Electronics Co., Ltd.
usb 4-1.6: SerialNumber: Z4ZFBFEZ500098J.
usblp 4-1.6:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3301
usbcore: registered new interface driver usblp
scsi 6:0:0:0: Direct-Access SanDisk uSD SDDR-289 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:1: Direct-Access SanDisk MS SDDR-289 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:2: Direct-Access SanDisk SD SDDR-289 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:3: Direct-Access SanDisk CF SDDR-289 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
sd 6:0:0:2: Attached scsi generic sg5 type 0
sd 6:0:0:3: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdd] Attached SCSI removable disk
sd 6:0:0:2: [sdf] Attached SCSI removable disk
sd 6:0:0:3: [sdg] Attached SCSI removable disk
sd 6:0:0:1: [sde] Attached SCSI removable disk
r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168f-1.fw into memory
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
kvm: disabled by bios
kvm: disabled by bios
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 4005
[fglrx] Firegl kernel thread PID: 4006
[fglrx] Firegl kernel thread PID: 4007
[fglrx] IRQ 47 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f838000, size:4000
[fglrx] Reserved FB block: Unshared offset:f83c000, size:4c4000
[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
tiger-demo[29566]: segfault at 1 ip 00007fe69278b3b4 sp 00007fff30eee4a0 error 4 in libc-2.17.so[7fe692740000+1a5000]
tiger-demo[29569]: segfault at 1 ip 00007f3c61c573b4 sp 00007fffea00ffc0 error 4 in libc-2.17.so[7f3c61c0c000+1a5000]
tiger-demo[29572]: segfault at 1 ip 00007f08366d63b4 sp 00007fff95c34e50 error 4 in libc-2.17.so[7f083668b000+1a5000]